Product Description
JCB 3CX 4CX Loader-Digger, High Performance Machine, ChinaUsed Construction Machinery
Excellent engine
Strong main pump
Swing bearing keep normal
Swing pump keep excellent
U/C 85%new
Keep excellent working condition, ready to work.
Good price, welcome inquiry!
The Backhoe Loader is a single device composed of three construction equipment. Commonly known as "busy at both ends". During construction, the operator can transform the working end by simply turning the seat. The main job of excavators is to excavate ditches to arrange pipes and underground cables, to lay the foundation for buildings and to establish drainage systems.
The main reason for the presence of Backhoe Loader on all worksites is that various projects require digging and moving dirt. Many other tools can also do such work, but the excavator loader can greatly improve efficiency. In comparison, Backhoe Loader are compact compared to large single-function equipment such as crawler excavators. They can also move around various construction sites and even run on highways. While some small loaders and excavators may be smaller than excavators, they save a lot of time and money if the contractor is carrying out both excavation and loading operations. Backhoe Loader includes: powertrain, loading end, excavating end. Each device is designed for a specific type of work. On a typical construction site, excavator operators typically need to use all three components to get the job done.
Excavator is the main tool of Backhoe Loader. It can be used to dig dense, hard material (often soil), or to lift heavy objects (such as drain culverts). Excavators can lift these materials and stack them on the side of the hole. Simply put, an excavator is an extremely powerful giant arm or finger, which is composed of three parts: the boom, the bucket rod, and the bucket.
Safe operation technique:
1.Before excavating the loader, the mouth and leg of the loading bucket should be fixed with the ground, so that the front and rear wheels are slightly off the ground, and the level of the fuselage should be maintained to improve the stability of the machine. Before digging, the loading bucket should be turned over so that the mouth of the bucket faces the ground, and the front wheel is slightly off the ground, step down and lock the brake pedal, and then extend the leg to lift the rear wheel off the ground and maintain a horizontal position.
2.If the boom suddenly stops in the middle of descending, the impact force caused by its inertia will damage the excavating device and destroy the stability of the machine, resulting in tipping accidents. During operation, the control handle should be stable and should not move sharply; The boom shall not be stopped halfway when descending. Do not use high gear when digging. The rotation should be smooth and should not hit and be used to smash the side of the groove. The buffer block at the back of the boom shall be kept intact; If there is damage, it should be repaired before use. When shifting, the excavating device should be in the middle transport state, the supporting leg should be folded, and the lifting arm should be lifted before it can be carried out.
3.Before loading, the rotary mechanism of the digging device should be placed in the middle position and fixed with a pull plate. Low gear should be used during loading. The bucket lifting arm should not use the floating position of the valve when lifting. The distribution valve of the hydraulic control system is divided into the first four valves and the back four valves. The first four valves operate the leg, lifting arm and loading bucket, etc., which are used for the leg expansion and loading operation; The rear four valves operate the bucket, rotary, boom and handle for rotary and digging operations. The dynamic performance of the machinery and the capacity of the hydraulic system do not allow and cannot carry out loading and digging operations at the same time.
4.When the first four valves are working, the last four valves shall not work at the same time. In the driving or operation, except outside the driving room, the excavator loader is strictly prohibited to ride or stand anywhere.
5.Generally, the Backhoe Loader uses a wheeled tractor as the main engine, and installs loading and digging devices before and after respectively, so that the length and weight of the machine are increased above, therefore, high-speed or sharp turns should be avoided during driving to prevent accidents. Do not slide in neutral when going downhill. When the hydraulic piston rod of the bucket and the bucket handle is maintained in the fully stretched position, the bucket can be brought close to the boom, and the digging device is in the shortest state, which is conducive to driving. When driving, the leg should be fully withdrawn, the digging device should be fixed firmly, the loading device should be lowered, and the bucket and bucket handle hydraulic piston rod should remain fully stretched.
6.After the wheeled tractor is converted into a Backhoe Loader, the machine weight increases a lot. In order to reduce the tire damage under heavy load, the rear wheel off the ground is taken when parked. When the parking time exceeds, the legs should be supported to make the rear wheel off the ground; When the parking time is longer than that, the rear wheel should be off the ground and should be supported by a pad under the rear suspension.
Detailed Photos
Product Parameters
| Product Parameter |
| Engine Type |
JCB441T1 |
| velocity of rotation |
2300rpm |
| Maximum digging depth |
4.21-5.97m |
| Hydraulic system capacity |
132L |
| Fuel capacity |
160L |
Packaging & Shipping
Packing Details:
Container or Bulk Ship or Flat Rack or Ro-Ro Ship We can make shipment for our customers if they do not own shipping agency, we can get cheapest shipping cost for our customer.This machine is delivered Worldwide and comes with a 5 day job site test drive and Money Back Guarantee.Test it on your job site for 5 days and return it for a full refund if you're not completely satisfied.
Port:
SHANGHAI, CHINA
Lead time:
| Quantity(sets) |
1 |
2-3 |
4-5 |
>5 |
| ead time(days) |
3 |
5 |
7 |
to be negotiated |
Company Profile
Export of second-hand mechanical vehicles
Professional export construction machinery and vehicle equipment, export customs declaration, maritime transportation, customs clearance. In addition, we also provide second-hand machinery to customise paint according to samples, various refurbishment and remanufacturing, maintenance and replacement accessories. We have 20 years of foreign trade experience, various foreign trade companies, terminal customers, middlemen, you can call WeChat and WhatsApp to consult at any time.
Welcome to buy a large number of second-hand construction machinery and equipment vehicles in stock. Contact us by phone in advance before coming to our company!
Our Advantages
Our company is an import and export company integrating industry and trade, the main construction machinery and equipment, such as excavators, bulldozers, loaders, dump trucks, mixing trucks, etc., the annual export volume of more than 2000 sets, exported to all over the world. The factory is located in Shanghai, covers an area of 2000 square meters, warehouse more than 100 machines and equipment, complete office facilities, excellent team.
After Sales Service
The main export countries of the company's products: countries along the Belt and Road, Central Asia, Southeast Asia, Russia, Africa, the Middle East, South America, Myanmar and other countries and regions, providing inspection, customs clearance, transportation and other integrated export services.
FAQ
1. Q: How about the quality of the machines exported from your country?
A: All the machines we export are in good condition and ready to work.
2. Q: What is your warranty period?
A: Two years of maintenance.
3. Q: What is your payment method?
A: Wire transfer is usually used (30% deposit +70% balance), other payment methods can be negotiated.
4. Q: What is your delivery time?
A: 3-5 working days after receiving the deposit.
5. Q: Do you have any certificates for your products?
A: All machines are IS verified.
6. Q: Why should you buy from us rather than from another supplier?
A: High quality, cheap price, owner of the machine, no middleman, honest and good experience in shipping and exporting.
){kind=link}