| Bucket Width: | 2033mm |
|---|---|
| Engine Power: | 134kw |
| Load Capacity: | 4000kg |
Suppliers with verified business licenses
966H 966C 966F 966G Caterpillar Loader strong power price favorable
Excellent engine
Strong main pump
Swing bearing keep normal
Swing pump keep excellent
U/C 85%new
Keep excellent working condition, ready to work.
Good price, welcome inquiry!
Loader is a kind of earthwork construction machinery widely used in highway, railway, construction, hydropower, port, mine and other construction projects, it is mainly used for shoveling soil, sand, lime, coal and other loose materials, but also for ore, hard soil and other light shoveling and digging operations. The replacement of different auxiliary working devices can also be used to move earth, lift and load and unload other materials such as wood.
In the construction of roads, especially in the construction of high-grade highways, loaders are used for filling and digging of roadbed engineering, aggregate and loading of asphalt mixtures and cement concrete yards. In addition, it can also be used to push soil, scrape the ground and pull other machinery. Because the loader has the advantages of fast working speed, high efficiency, good mobility and light operation, it has become one of the main types of earthwork construction in engineering construction.
The main components include engine, torque converter, gearbox, front and rear drive axle, referred to as the four major parts:
1. Engine.
2. There are three pumps on the torque converter, working pump (supply lifting, tipping bucket pressure oil) steering pump (supply steering pressure oil) Variable speed pump is also called walking pump (supply strain moment, transmission pressure oil), some models of steering pump is also equipped with pilot pump (supply pilot pressure oil control valve).
3. Working hydraulic oil circuit, hydraulic oil tank, working pump, multi-way valve, lifting cylinder and tipping bucket cylinder.
4. Traveling oil circuit: transmission oil pan oil, traveling pump, all the way into the torque converter, all the way into the gear valve, transmission clutch.
5. Drive: Drive shaft, main differential, wheel reducer.
6. Steering oil: oil tank, steering pump, steady flow valve (or priority valve) steering gear, steering cylinder 7. There are two kinds of transmission: one (planetary) and two (fixed shaft).
Working device:
The shovel digging and material loading and unloading operations of the loader are realized through the movement of its working device. The working device of the loader is composed of a bucket, a boom, a connecting rod, a rocker arm, a rotating bucket cylinder, a boom cylinder, etc. The whole working device is hinged on the frame. The bucket is hinged with the rotary bucket cylinder through the connecting rod and the rocker arm for loading and unloading materials. The boom is hinged with the frame and the boom cylinder to lift the bucket. The turnover of the bucket and the lifting of the boom are hydraulically controlled.
When the boom is in any position and the bucket rotates around the hinge point of the boom for unloading, the tilt Angle of the bucket is not less than 45°, and the bucket can be automatically levelled when the boom drops after unloading. Based on the structural type of the loader working device at home and abroad, there are seven main types, namely, according to the number of members of the connecting rod mechanism, it is divided into three-bar, four-bar, five-bar, six-bar and eight-bar, etc. According to whether the steering of the input and output rods is the same, it is divided into positive and reverse connecting rod mechanisms. Loader bucket structure for earthmoving engineering, the bucket body is commonly made of low-carbon, wear-resistant, high-strength steel plate welding, cutting edge is made of wear-resistant manganese alloy steel material, side cutting edge and reinforced Angle plate are made of high-strength wear-resistant steel material. The shape of the bucket cutter is divided into four types. The selection of tooth shape should consider insertion resistance, wear resistance and easy replacement. The tooth shape is divided into sharp teeth and blunt teeth. The wheeled loader mostly uses sharp teeth, and the tracked loader mostly uses blunt teeth. The number of teeth depends on the width of the bucket, and the tooth distance is generally 150-300mm. The bucket tooth structure is divided into two types, small and medium-sized loaders mostly use the whole, and large loaders often use the split type due to poor working conditions and serious wear of the bucket teeth. Split bucket teeth are divided into basic teeth and tooth tip two parts, after wear only need to replace the tooth tip.
| Parameter | |
| Engine type | Cat 3126B ACERT |
| Rated power/speed | 134kw/r/min |
| Machine operating weight | 13452kg |
| Dipper capacity | 2.3m3~3.0m3 |
Packing Details:
Container or Bulk Ship or Flat Rack or Ro-Ro Ship We can make shipment for our customers if they do not own shipping agency, we can get cheapest shipping cost for our customer.This machine is delivered Worldwide and comes with a 5 day job site test drive and Money Back Guarantee.Test it on your job site for 5 days and return it for a full refund if you're not completely satisfied.
Port:
SHANGHAI, CHINA
Export of second-hand mechanical vehicles
Professional export construction machinery and vehicle equipment, export customs declaration, maritime transportation, customs clearance. In addition, we also provide second-hand machinery to customise paint according to samples, various refurbishment and remanufacturing, maintenance and replacement accessories. We have 20 years of foreign trade experience, various foreign trade companies, terminal customers, middlemen, you can call WeChat and WhatsApp to consult at any time.
Welcome to buy a large number of second-hand construction machinery and equipment vehicles in stock. Contact us by phone in advance before coming to our company!
The main export countries of the company's products: countries along the Belt and Road, Central Asia, Southeast Asia, Russia, Africa, the Middle East, South America, Myanmar and other countries and regions, providing inspection, customs clearance, transportation and other integrated export services.
1. Q: How about the quality of the machines exported from your country?
A: All the machines we export are in good condition and ready to work.
2. Q: What is your warranty period?
A: Two years of maintenance.
3. Q: What is your payment method?
A: Wire transfer is usually used (30% deposit +70% balance), other payment methods can be negotiated.
4. Q: What is your delivery time?
A: 3-5 working days after receiving the deposit.
5. Q: Do you have any certificates for your products?
A: All machines are IS verified.
6. Q: Why should you buy from us rather than from another supplier?
A: High quality, cheap price, owner of the machine, no middleman, honest and good experience in shipping and exporting.
){kind=link}