Used Mitsubishi 30t Forklift, Good Performance, Powerful Engine

• After-sales Service: 6 Months
• Warranty: Two Years
• Cab Location: Not Adjustable
• Model NO.: MITSUBISHI 30T
• Type: Diesel Forklift
• Power: Diesel Engine
• Load Capacity: 30t
• Fuel: Diesel
• Load center: 1250mm
• Lift height: 3000mm-8100mm
• Condition: Used
• Total Weight: 30t
• Walking Mode: Internal Combustion Walking Mode
• Engine Type: S6s
• Transport Package: Cargo Ship Transport
• Specification: MITSUBISHI 30T
• Trademark: MITSUBISHI
• Origin: Japan
• HS Code: 12345
• Production Capacity: 100pieces

Product Description

Product Description

Used MITSUBISHI 30T Forklift, Good Performance, Powerful Engine

Excellent engine
Strong main pump
Swing bearing keep normal
Swing pump keep excellent
U/C 85%new
Keep excellent working condition, ready to work.
Good price, welcome inquiry!
Forklift is an industrial handling vehicle, which refers to a variety of wheeled handling vehicles for loading and unloading, stacking and short-distance transportation of pallet goods. The International Organization for Standardization ISO/TC110 is called industrial vehicle. It is often used for the transportation of large storage objects, usually using fuel engines or batteries. The technical parameters of forklift are used to show the structural characteristics and working performance of forklift. The main technical parameters are: rated lifting weight, load center distance, maximum lifting height, gantry Angle, maximum driving speed, minimum turning radius, minimum ground clearance and wheelbase, wheel base, etc.
1, rated lifting weight: the rated lifting weight of the forklift refers to the distance between the center of gravity of the goods and the front wall of the fork is not greater than the load center distance, the maximum weight of the goods allowed to be lifted, expressed in T (tons). When the center of gravity of the goods on the fork exceeds the specified load center distance, the lifting weight should be reduced accordingly due to the limitations of the longitudinal stability of the forklift.
2, the center distance of the load: the center distance of the load refers to the horizontal distance T of the vertical section of the front wall of the center of gravity of the fork when the standard goods are placed on the fork, expressed in mm (mm). For 1T to 4T forklifts, the load center distance is 500mm.
3. Maximum lifting height: The maximum lifting height refers to the vertical distance between the upper surface of the horizontal section of the fork and the horizontal ground where the forklift is located when the forklift is fully loaded and the goods rise to the highest position on a flat and solid ground.
4, door frame Angle: door frame Angle refers to the unloaded forklift on a flat and solid ground, the door frame relative to its vertical position forward or backward maximum Angle. The function of the front Angle is to facilitate the forklift and unloading of cargo; The role of the back Angle is to prevent the goods from slipping off the fork when the forklift is carrying freight. Generally, the front inclination Angle of the forklift is 3°~6°, and the rear inclination Angle is 10° ~ 12°.
5, the maximum lifting speed: the maximum lifting speed of the forklift usually refers to the maximum lifting speed of the cargo when the forklift is fully loaded, expressed in m/min (m/min). Increasing the maximum lifting speed can improve the working efficiency, but the lifting speed is too fast, which is prone to cargo damage and aircraft damage accidents. The maximum lifting speed of domestic forklift trucks has been increased to 20m/min.
6, the maximum driving speed: improving the driving speed has a great impact on improving the working efficiency of the forklift. For an internal combustion forklift with a lifting weight of 1T, the minimum driving speed is not less than 17m/min when fully loaded.
7. Minimum turning radius: When the forklift is driving at a low speed without load and turning with the steering wheel full, the minimum distance between the outermost and innermost parts of the vehicle body and the turning center is called outside the minimum outer turning radius and inside the minimum inner turning radius, respectively. The smaller the minimum outside turning radius, the smaller the ground area required for forklift turning, and the better the maneuverability.
8, minimum ground clearance: minimum ground clearance refers to the distance from the lowest fixed point on the body to the ground outside the wheel, which indicates the ability of the forklift to cross the raised obstacles on the ground without collision. The larger the minimum ground clearance, the higher the passability of the forklift.
9, wheelbase and wheel base: forklift wheelbase refers to the horizontal distance between the center line of the front and rear axle of the forklift. Wheel pitch is the distance between the center of the left and right wheels on the same axis. The increase of wheelbase is beneficial to the longitudinal stability of forklift truck, but it increases the length of the body and the minimum turning radius. Increasing the wheel base is beneficial to the lateral stability of forklift truck, but will increase the total body width and minimum turning radius.
10, the minimum width of the right Angle channel: the minimum width of the right Angle channel refers to the minimum width of the right Angle intersection channel for the forklift to travel back and forth. It is represented by mm. Generally, the smaller the minimum width of the right-angle channel, the better the performance.
11, the minimum width of the stacking channel: the minimum width of the stacking channel is the minimum width of the channel when the forklift is operating normally.

Detailed Photos

Product Parameters

parameter
total weight	40.2t
Walking mode	Internal combustion walking mode
engine type	S6S

 

Packaging & Shipping

Packing Details:
Container or Bulk Ship or Flat Rack or Ro-Ro Ship We can make shipment for our customers if they do not own shipping agency, we can get cheapest shipping cost for our customer.This machine is delivered Worldwide and comes with a 5 day job site test drive and Money Back Guarantee.Test it on your job site for 5 days and return it for a full refund if you're not completely satisfied.
Port:
SHANGHAI, CHINA
 

Company Profile

Export of second-hand mechanical vehicles
Professional export construction machinery and vehicle equipment, export customs declaration, maritime transportation, customs clearance. In addition, we also provide second-hand machinery to customise paint according to samples, various refurbishment and remanufacturing, maintenance and replacement accessories. We have 20 years of foreign trade experience, various foreign trade companies, terminal customers, middlemen, you can call WeChat and WhatsApp to consult at any time.
Welcome to buy a large number of second-hand construction machinery and equipment vehicles in stock. Contact us by phone in advance before coming to our company!

Our Advantages

Our company is an import and export company integrating industry and trade, the main construction machinery and equipment, such as excavators, bulldozers, loaders, dump trucks, mixing trucks, etc., the annual export volume of more than 2000 sets, exported to all over the world. The factory is located in Shanghai, covers an area of 2000 square meters, warehouse more than 100 machines and equipment, complete office facilities, excellent team.

After Sales Service

The main export countries of the company's products: countries along the Belt and Road, Central Asia, Southeast Asia, Russia, Africa, the Middle East, South America, Myanmar and other countries and regions, providing inspection, customs clearance, transportation and other integrated export services.

FAQ

1. Q: How about the quality of the machines exported from your country?
A: All the machines we export are in good condition and ready to work.
2. Q: What is your warranty period?
A: Two years of maintenance.
3. Q: What is your payment method?
A: Wire transfer is usually used (30% deposit +70% balance), other payment methods can be negotiated.
4. Q: What is your delivery time?
A: 3-5 working days after receiving the deposit.
5. Q: Do you have any certificates for your products?
A: All machines are IS verified.
6. Q: Why should you buy from us rather than from another supplier?                                                        
A: High quality, cheap price, owner of the machine, no middleman, honest and good experience in shipping and exporting.